MEPS SZ60A 4in1 ESC Review
In this review, I will take a closer look at the MEPS SZ60A 4in1 ESC and present its features, benefits, and drawbacks. By the end of this review, you will have a good understanding of whether or not the SZ60A 4in1 ESC is the right choice for your needs.
The electronic speed controller MEPS SZ60A 4in1 ESC is a high-performance ESC designed for FPV drones and demanding pilots. It has a maximum current load of 65A, which means it can handle the high current demands of acrobatic maneuvers and high-speed racing. It also features an upgraded heat sink and industrial-grade PCB that significantly improves the heat dissipation capacity. This makes it a reliable and durable ESC that can withstand the rigors of FPV flying.
It is compatible with 2-6S LiPo batteries, making it suitable for a wide range of builds.
It supports a BLHeli_32 firmware. This gives users the best experience for tunning the esc with the BLheli 32 suite
It has a built-in current sensor that can be used to monitor the current draw of each motor. This can be helpful for troubleshooting and ensuring that the ESC is not overloaded.
It supports OneShot125, Multishot, and DShot protocols, which can be used to improve the performance and responsiveness of your drone.
The MEPS SZ60A 4in1 ESC is a relatively new ESC on the market, but it has quickly become a popular choice among FPV pilots. It offers a number of features that make it a great value for the price, including:
A maximum current load of 65A
An upgraded heat sink and industrial-grade PCB
Compatibility with most mainstream FPV frames
Support for a variety of ESC protocols
A more affordable price than many other premium ESCs
Key Features
Let's take a closer look at some of the key features of the MEPS SZ60A 4in1 ESC:
Maximum current load of 65A: This means that the ESC can handle the high current demands of acrobatic maneuvers and high-speed racing. This is important for ensuring smooth and consistent performance, even under heavy load.
Upgraded heat sink and industrial-grade PCB: The ESC features an upgraded heat sink and industrial-grade PCB that significantly improves the heat dissipation capacity. This helps to prevent the ESC from overheating, which can lead to premature failure.
Compatibility with most mainstream FPV frames: The ESC is compatible with most mainstream FPV frames with mount holes 30x30, making it a versatile choice for a wide range of builds.
Support for a variety of ESC protocols: The ESC supports a variety of ESC protocols, including BLHeli_32, DSHOT, and OneShot125. This gives you the flexibility to choose the protocol that best suits your needs.
More affordable price than many other premium ESCs: The MEPS SZ60A 4in1 ESC is more affordable than many other premium ESCs on the market. This makes it a great option for budget-minded FPV pilots.
Pros and Cons
Here is a summary of the pros and cons of the MEPS SZ60A 4in1 ESC:
Pros:
High current load capacity
Excellent heat dissipation
Compatible with most frames
Supports a variety of protocols
More affordable
BLHeli_32
Solder pads on both sides
Cons:
No Available in Europe yet
(Large soldering pads on both sides up and down for easy soldering your drone motors and also if something goes wrong the one side you always have an alternative option )
Overall
The MEPS SZ60A 4in1 ESC is a great option for FPV drones that require a high current load capacity and excellent heat dissipation capabilities. It is also more affordable than many other ESCs on the market. However, if you are in Europe, you may have to wait until there are more resellers available.
Some additional details about the MEPS SZ60A 4in1 ESC:
It is made of high-quality materials, including an aluminum alloy heat sink and an industrial-grade PCB.
It supports a variety of ESC protocols, including DSHOT up to 600.
It is compatible with most mainstream FPV frames with 30x30 mounting holes.
It can handle the high current demands
Recommended Combo Electronics
The MEPS SZ60A 4in1 ESC can be paired with a variety of flight controllers and motors. However, here are a few recommended combos that I recommend :
FLIGHT CONTROLLER: "DJI Flight Controller"
The SZ F7 HD Flight Controller is a high-performance flight controller designed for FPV drones. It features a STM32 F7 MCU and BMI270 gyro sensor, which provide lower latency, smoother operation, and faster calculation. It also has built-in HD OSD, making it easy to keep track of flight status.
Plug-and-play DJI HD support: No soldering required for easy installation.
Built-in HD OSD: Keep track of flight status, such as battery voltage, RSSI, and flight mode.
Multi-peripheral friendly: With 5V/2A and 10V/2A BEC outputs, it can power a variety of peripherals, such as GPS, LED strip, and buzzer.
Lower latency: Smoother operating, faster calculation, and more sensitive response.
Simple tuning experience: Compatible with Betaflight firmware and can be configured via Betaflight Configurator software.
Motors: Quad motors: 5 inch freestyle motor or 2207 racing motor
The SZ2207 and the SZ2306 FPV Racing Drone Motors are high-performance motors designed for 5-inch racing drones and in my opinion are the best motors for your drone . It features a Sunflower Unibell design, which provides better heat dissipation and efficiency. It is also available in three KV options (1950, 1750, and 2750), so you can choose the right motor for your needs and four different colors (orange , cyan cool grey and fluorescent green) to match with your build
Features
Sunflower Unibell design: Provides better heat dissipation and efficiency.
Three KV options: 1950, 1750, and 2750.
Industry's first fluorescent green color scheme.
Designed for the harsh environment of professional racing.
6082 aluminum bell, TC4 reinforced titanium alloy shaft, N52H arc magnets, military-grade high-temperature enameled wire, and 12.9-grade hexagonal socket
Benefits
Faster acceleration and top speed.
Better heat dissipation and efficiency.
More durable and reliable.
Wider range of applications.
More stylish and unique.
Applications
The SZ2207 and SZ2306 FPV Racing Drone Motors are suitable for a variety of 5-inch racing drones and the best choice to fit your SZ60A 4in1 ESC and SZ F7 HD Flight Controller. It is also a good choice for beginners and experience pilots who are seeking for high-performance motor that can take their racing to the next level.
The above combo includes high-quality components that offer a great value for the price. They will provide your drone with the power and performance it needs to fly smoothly and efficiently and the will boost your flying style in racing or freestyle.
Conclusion
The MEPS SZ60A 4in1 ESC is a great option for FPV pilots who are looking for a reliable and high-performance ESC. It is well-made, affordable, and compatible with most mainstream FPV frames. If you are looking for an ESC that can handle the demands of your flying style, then the MEPS SZ60A 4in1 ESC is a great choice and its even better if you decide to make the perfect choice and use it with the MEPS SZ F7 HD flight controller and the SZ2207 or SZ2306 motors .
Blog From MEPS Sponsor Pilot----Agorastos Laskaridis aka Kinky_FPV
For more information on MEPS please click here
Comments